• PLASMA HOLDER & SIDE SHIELDS
  The plasma holder is designed to fit most plasma cutters available on the market. We recommend the Hypertherm PowerMax series. The side shields help block sparks and debris that are emitted from the machine.

• FRONT POSITION GATE
  The roller gates compress upon a center location to provide symmetrical rotation of the tube. The vise-style screw system holds itself into position. No adjustment is needed as you run a stick of raw material.

• CENTER SUPPORT LIFTER
  The lifter’s motor drives it along a vertical axis to support the material and prevent bowing/whipping during operation. An air actuation system positions the roller over the rail and rotates out of the way when necessary.

• ENGRAVER
  The Dragon’s improved engraver system is second to none. An inline oilier is supplied to keep it functioning efficiently. The engraver is used for part marking and for designs that are to be etched onto the material.

• LASER LIGHT
  The laser light allows for material line up when using the pass through chuck capability or when needing to flip the tube end for end to reduce or eliminate the remnant drop between the chuck and the cutting head.

• MINI WATER TRAY
  The mini water tray captures about 95% of the sparks. This greatly decreases the fumes experienced during plasma cutting.

Our Bendtech Dragon A400 CNC Tube and Pipe plasma is your gateway into light industrial CNC tube cutting, engraving, and marking machine. From Drawing to Finished Product faster than ever before.
Conventionally, preparing tube drawings for CNC machines would involve hours or even days of work, plus trial and error during the assembly and fabrication process – all adding unnecessary time, cost and material wastage.

Dragon software is able to take your 3D CAD drawings and then automatically unfold them into flat 2D layouts, ready for the Dragon machine to manufacture.

Work with CAD drawings designed in virtually any common format (Bend-Tech, Solidworks, AutoCAD, etc) or even hand drawings.

Dragon’s exclusive CAD to CNC software will provide fast and intelligent file handling & converting to help you manufacture the exact part you have in mind.

By reducing the ‘gap’ between your designs and the CNC machine, your work can now be done in minutes with no mistakes!

Dragon’s software’s conversion process will even compensate for your material stretching, spring-back, rotations, etc.

Includes nesting ability to allow multiple parts to but cut from the same stock tube.

The dragon is a very affordable system that will increase production whilst bringing down costs by outsourcing the same work.

• Dragon CAM/CNC Software
• Dragon Software
• Marking Station
• Center Support Lifter
• Engraver
• Laser for positioning
• Pc – controls and Console
• Hypertherm Powermax Plasma

With the help of the Dragon software, the Dragon A400 series is able to engrave / plasma cut and mark precise bending locations & rotation values onto the tubes. These compensate for your material’s stretching and allow for flawless line-ups in your bender. It can also draw saddle marks where tubes will intersect for quick and accurate assembling. Using the Tube Dragon in conjunction with a rotary tube bender you can also increase production, hold tighter tolerances, and develop new products.