Hypertherm Powermax 105 Overview:

The Hypertherm Powermax 105 delivers superior cut capabilities on 1-1/4″ (32 mm) thick metals. It has the duty cycle and industrial performance necessary for tough cutting and gouging jobs.

Seven Duramax torch styles provide versatility for hand cutting, portable automation, x-y table cutting, and robotic cutting and gouging.

Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length. It also detects electrode end-of-life, automatically turning off power to the torch to prevent potential damage to other parts or to the workpiece.

Operating data

 Capacity Thickness Cut speed
Cutting
Recommended 32 mm (1-1/4″) 500 mm/min (20 ipm)
38 mm (1-1/2″) 250 mm/min (10 ipm)
Severance (hand cutting) 50 mm (2″) 125 mm/min (5 ipm)
Pierce* 22 mm (7/8″)
* Pierce rating for handheld use or with automatic torch height control

CapacityMetal removal rate

Groove profile

GougingTypical gouge9,8 kg/hr
(21.7 lbs/hr)6,4 mm D x 7,4 mm W
(0.25″ D x 0.29″ W)

pmx105_cut_performance_chart

Specifications

Input voltages CSA

200-600 V, 3-PH, 50/60 Hz

CE

400 V, 3-PH, 50/60 Hz
200-400 V, 3-PH, 50/60 Hz

CCC

380 V, 3-PH, 50/60 Hz

Input current @ 21.9 kW

200/208/240/380/400/480/600 V, 58/56/49/28/25/22 A

Output current

30 – 105 A

Rated output voltage160 VDC

Duty cycle @ 40°C (104°F)80% @ 105 AOpen circuit voltage (OCV)

 

  • 200-600 CSA
  • 380 V CCC
  • 230-400 V CE
  • 400 V CE
  • 300 VDC
  • 288 VDC
  • 288 VDC
  • 292 VDC

Hypertherm Powermax 105 Dimensions with handles

 

592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)

Weight with 7.6 m (25′) torch

  • 200-600 V CSA
  • 380 V CCC/400 V CE
  • 230-400 V CE
  • 45 kg (100 lbs)
  • 41 kg (90.4 lbs)
  • 45 kg (100 lbs)

Gas Supply

 

Clean, dry, oil-free air or nitrogen

Recommended gas inlet
flow rate / pressureCutting: 217 l/min (460 scfh) @5.9 bar (85 psi)
Gouging: 227 l/min (480 scfh) @4.8 bar (70 psi)

Input power cable length

3 m (10′)*

Power supply type

Inverter – IGBT

Engine drive requirement

30 kW for full 105 A output

Certifications

CSA-certified for use in the Americas and Asia, except China.
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.

 

Engine-driven generator operation

Engine drive rating System output current Performance (arc stretch)
30 kW 105 A Full
22.5 kW 105 A Limited
22.5 kW 85 A Full
15 kW 85 A Limited
15 kW 65 A Limited

Production cut chart

Material Thickness Current Production cut speed*
inches mm amps ipm mm/min
Mild steel 1/4 6 105 192 5090
3/8 8 105 116 3870
1/2 12 105 76 2060
3/4 20 105 40 940
Stainless steel 1/4 6 105 224 6000
3/8 8 105 112 4210
1/2 12 105 68 1860
3/4 20 105 34 810
Aluminum 1/4 6 105 265 7090
1/2 12 105 91 2450
3/4 20 105 50 1190
75° hand torch 75° and 15°
hand torches

180° full-length machine torch

180° full-length machine torch and 75° hand torchPower suppliesVoltage configurations7.6 m (25′)15.2 m (50′)7.6 m (25′)15.2 m (50′)7.6 m (25′)

15.2 m (50′)

7.6 m (25′)  without remote pendantwith remote pendantwithout remote pendantwith I/O cables (no pendant)with remote pendantwithout remote pendant

with I/O cables (no pendant)

with remote pendantStandard power supply200-600 V CSA1059374

059375

230-400 V CE2059394

059395

400 V CE2059414

059415

380 V CCC3059434

059535

Power supply with CPC port and voltage divider200-600 V CSA059376059377059382059383059378059380 059379

059381

059384230-400 V CE059396059397059402059403059398059400 059399

059401

059404400 V CE059416059417059422059423059418059420 059419

059421

059424380 V CCC059436059437059442059433059438059440 or 0594504 059439

059441 or 0594514

Power supply with CPC port, voltage divider, and serial port200-600 V CSA      059386

059387

230-400 V CE      059406

059407

400 V CE      059426

059427

380 V CCC      059446 or 0594484

059447 or 0594494