• AUTOINDEX SYSTEM
  The direct drive tool rotation in the Euromac AutoIndex stations uses fewer mechanical components to guarantee strength, more reliable machining results and reduced maintenance, with huge time savings.

• UPFORMING SYSTEM
  The 6 B stations of the MTX FLEX 12 turret feature retractable dies for more forming flexibility. Standard thick turrettooling forming tools usually have an “active” die. These dies protrude a few millimeters over the normal height of a standard punch die, requiring special attention to setup and programming.

• ELIMINATING RESTRICTION
  All additional 6 B-Stations of the MTX FLEX 12 can be raised up to 6 mm only when the tool is actually employed and lowered when it is passive eliminating any restriction.

• VACUUM SYSTEM
  Our vacuum system prevents scraps from remaining on the sheet, potentially damaging its surface and sometimes even the tool itself. Strongly recommended when processing thin materials, material with protective film or aluminium in general.
  Optional on all models

• LOADING & UNLOADING CAPACITY
  Easy loading of material for machining and unloading of finished parts generates much higher productivity for you.

• MACHINING CAPABILITY
  As for all Euromac products, flexibility is key: just one machine can process a vast assortment of sizes. All sizes between the stated minimum and maximum dimensions can be processed.

CNC turret machines from Euromac can create many shapes, from simple circles or rectangles to overlapping geometrical 3D designs.

CNC punching plays a significant role in sheet metal manufacturing industries in our local markets, delivering machinery with high accuracy, speed that is competitively priced is the reason our Euromac Turret punch systems are the most popular choice for our customers.

Upforming System The 6 B stations of the MTX FLEX 12 turret feature retractable dies for more forming flexibility. Standard thick turrettooling forming tools usually have an “active” die. These dies protrude a few millimeters over the normal height of a standard punch die, requiring special

The processing range for most CNC punch presses is 0.5mm to 6.0mm thick in a range of materials including steel, zintec, galvanised steel , stainless steel and aluminium. The choice of hole punched can be as simple as a circle or rectangle right through to special shapes to suit a specific cut out design. By using a combination of single hits and overlapping geometries, complex sheet metal component shapes can be produced. The machine may also punch 3D forms such as dimples, taptite® screw thread plunges, and electrical knockouts etc on either side of the sheet, which are often employed in sheet metal enclosure design.

By using our Euromac machinery you can have a large number of strokes, with several different tools in turn, a turret press may make a wide variety of parts without having to first make a specialised press tool for that task. This saves both time and money, allowing rapid prototyping or for low volume production to start without tooling delays.

A hydraulic ram forces the tooling into the sheet material held in position by clamps on the bed of the punch. The tooling can then be used to create a number of shapes like:

• Louvres
• Centre punches
• Countersinks
• Embosses
• Knockouts
• Hinge forming

Euromac machines are tailored to meet demanding market requirements; the combination of state-of-the-art technologies and unique concepts assures you advanced, productive and competitive products at all times.