Hypertherm Plasma Cutters | Plasma-Powermax Family | Hypertherm Plasma Cutting Tables for Sale

Hypertherm Ireland Offer

Understanding Plasma Technology

Powermax  Plasma Cutters system cut metal quickly, and cleanly

Plasma Cutters, and its intense heat (up to 22,000C), is created when gas is ionized by electrical energy. Powermax systems use plasma to melt metal, and compressed air or nitrogen to blow the molten metal away, leaving a good quality cut edge ready to weld in most cases. Powermax systems are also effective for gouging metal.

Hypertherm Ireland | Powermax Family | Plasma Cutting

Ireland Hypertherm Powermax plasma

Powermax 30 Air

Powermax-30

Powermax 45

Powermax-45

Powermax 65

Engineeringmachinerypowermax-65-image-230704-grande-377x281

Powermax 85

Powermaxireland85-377x281

Powermax 105

rsz_powermax_105_60995-370x250

Powermax 125

rsz_engineering_machinery-powermax-125
Powermax30 AIR Powermax30 XP Powermax45 Powermax65 Powermax85 Powermax105 Powermax125
Visit product page Visit product page Visit product page Visit product page Visit product page Visit product page Visit product page
Handheld cut capacity Recommended
5/16″ (8 mm)Severance
5/8″ (16 mm)
Recommended
3/8″ (10 mm)Severance
5/8″ (16 mm)
Recommended
1/2″ (12 mm)Severance
1″ (25 mm)
Recommended
3/4″ (20 mm)Severance
1 1/4″ (32 mm)
Recommended
1″ (25 mm)Severance
1 1/2″ (38 mm)
Recommended
1 1/4″ (32 mm)Severance
1 3/4″ (44 mm)
Recommended
1 1/2″ (38 mm)Severance
2 1/4″ (55 mm)
Mechanized pierce capacity1 Not applicable Not applicable 1/2″ (12 mm) 5/8″ (16 mm) 3/4″ (20 mm) 7/8″ (22 mm) 1″ (25 mm)

Cut or gouge any electrically conductive metal

Whether in a shop, factory, at home or in the field, Powermax plasma cutters system cut and gouge all metal types and forms. Most models are available with a handheld or machine torch to fit the application.

Hypertherm_Shipbuilding_trackcutting
PowermaxIrelandVesselFab

Operating a plasma system requires

  • AC power source (fixed or generator)
  • Compressed air – shop air, portable air compressor or bottled air. Nitrogen is often used for stainless steel.
  • Safety equipment, including shaded glasses or face shield, gloves, protective clothing and proper ventilation.
UA-32775583-1